AT200 — Vehicle Awning Tent
Create a shaded, bug-screened camp space beside your vehicle in minutes—no roof rack or permanent installation required.
- 54 sq ft of covered space
- Four-sided mesh with front and rear zip doors
- Standard Package includes two side panels and one front/rear panel
- 18 lb · packs into one bag and fits in your trunk
Ground sheet, light bar and extra pole kits sold separately.
Compatible accessories
Sold separately · use the cart button to add an accessory.
Free shipping over $29
2-year warranty
Lifetime support
AT200 — Vehicle Awning Tent
Your outdoor space. Ready in minutes.
Create a shaded, bug-screened shelter beside your vehicle in minutes, with no roof rack required.
No drilling. No permanent installation. Just more room to relax wherever you park.
~5 min
Typical setup
~54 sq ft
Room outdoors
UPF 50+
Canopy protection
18 lb
Standard Package · one carry bag
A more comfortable awning space.
The AT200’s dome-shaped roof creates extra headroom for a more open, comfortable outdoor space. Relax in the shade, move around, and make yourself at home beside your vehicle.
- Spacious canopy: 6.56 × 8.2 ft of shade—approximately 54 sq ft.
- Adjustable canopy poles: Two height settings: 5.3 ft or 5.9 ft.
- Raised dome roof: Up to 7.2 ft at the peak.
4-step setup
One person can handle the setup, typically taking around five minutes. Allow more time on your first try and follow the supplied instructions.
01 · Set up canopy poles
Lay the tent flat and slide the two foldable poles into the canopy sleeves.
02 · Attach to your vehicle
Secure the suction mounts to a suitable smooth roof or side surface using the built-in pump.
03 · Install support poles
Assemble the support poles, insert them into the front rings and tighten the locking knobs.
04 · Secure with guy lines
Stake down the tent and adjust the guy lines.
Fresh air. Fewer insects.
Keep the breeze flowing and enjoy a comfortable space beside your vehicle.
Four-sided insect-proof mesh
Four-sided mesh helps keep mosquitoes and insects out while maintaining airflow. Roll up the mesh panels and secure them when you want an open setup.
Front & rear zip doors
Zip doors at both the front and rear give you easy access to your campsite and vehicle.
Modular design. Use panels as needed.
Enjoy AT200 as an open, airy awning. Lower the integrated mesh or attach the included protective panels for bug coverage, privacy and extra weather protection.
Bug-free basecamp
Enjoy fresh airflow with four-sided mesh protection.
Side wall panel
Zip on side walls to help block harsh side sunlight and wind.
Extended shade
Raise an attached panel with additional support poles, sold separately, to extend your shaded space.
Weather protection
Zip on the included panels for added protection from wind and rain.
Privacy space
Use the two side panels and one front/rear panel included in the Standard Package to create a more private outdoor space.
Maximum shelter
Add extra support poles and panels, sold separately, to expand your covered campsite.
Lightweight yet durable.
From heat-reflective fabric to reinforced stress points, every detail is built for outdoor comfort.
- UPF 50+: Titanium reflective coating helps block harsh sunlight and reduce heat buildup.
- 3000 mm waterproof fabric: 210D Oxford fabric helps repel rain.
- Reinforced construction: Dyneema-reinforced corners, aluminum poles and secure anchors improve stability.
Strong suction. Reliable stability.
A secure setup starts with suitable mounting surfaces, correctly fitted poles and well-tensioned anchors.
Air-pump suction mounts
Each 4.5-inch mount has a listed vertical holding force of up to 800 N. Use with support poles, stakes and guy lines.
Foldable aluminum alloy poles
Strong, foldable poles support the canopy and pack neatly away between trips.
Vehicle compatibility
AT200 fits many SUVs, pickups, vans and RVs with a clean, smooth surface suitable for suction mounting.
SUVs
Pickups
Vans
RVs
Standard mounting is designed for vehicles with a roof height above 5.2 ft.
- 5.2–6.2 ft roof height: Roof mounting is recommended.
- Above 6.2 ft roof height: Side mounting is recommended.
For low-roof cars or limited mounting space, contact CAMPERIG with your vehicle model, roof height and mounting-surface photos to confirm fit or discuss optional mounting components.
Fits on the rear of your vehicle.
Choose a suitable smooth mounting surface for your rear setup. Additional poles for extended shade are sold separately.
Compact & portable storage.
Folds down small to fit easily in your vehicle. When you are not camping, AT200 stores neatly in your trunk.
18 lb Standard Package. One carry bag.
Dimensions & specifications
| Model | AT200 portable vehicle awning tent |
|---|---|
| Capacity | 2–4 people |
| Typical setup | Around 5 minutes |
| Unfolded size | 6.6 × 8.2 × 7.2 ft |
| Covered space | Approximately 54 sq ft |
| Canopy pole settings | 5.3 ft or 5.9 ft |
| Packed size | 19.7 × 7.1 × 5.5 in |
| Package size | 21.7 × 7.9 × 5.9 in |
| Standard Package weight | 18 lb |
| Fabric / coating | 210D Oxford fabric / titanium blackout coating |
| Frame / reinforcement | Foldable aluminum alloy poles / Dyneema (UHMWPE) reinforcement |
| Sun / rain protection | UPF 50+ / PU3000+ mm waterproof fabric rating |
| Suction mounts | 4.5 in diameter; up to 800 N listed vertical holding force |
| Standard vehicle height | Above 5.2 ft; suitable clean, smooth mounting surface required |
| Warranty | 2-year warranty |
Check mounts and anchors during use. The suction holding force is not a wind rating. Pack down in severe weather.
Everything you need to get started.
The Standard Package includes the awning, integrated mesh, mounting hardware, poles, guy lines, stakes, carrying bags and three protective panels.
Frequently asked questions
Do I need a roof rack?
No. AT200 uses air-pump suction mounts and requires no roof rack, drilling or permanent modification. Check vehicle height and the mounting surface before use.
Can one person set it up?
AT200 is designed for solo setup in about five minutes. Allow more time on your first try and follow the supplied instructions.
Can I enclose the space?
Yes. Use the integrated four-sided mesh for airflow and bug protection. Attach the two side panels and one front/rear panel included in the Standard Package for privacy and extra coverage.
Can AT200 be used without a vehicle?
No. AT200 must remain attached to a vehicle with its suction mounts, support poles, stakes and guy lines installed. It is not a freestanding tent.
Will it fit my vehicle?
Standard mounting is designed for vehicles with a roof height above 5.2 ft.
- 5.2–6.2 ft roof height: Roof mounting is recommended.
- Above 6.2 ft roof height: Side mounting is recommended.
For low-roof cars or limited mounting space, contact CAMPERIG with your vehicle model, roof height and mounting-surface photos to confirm fit or discuss optional mounting components.
What is sold separately?
The Standard Package includes the setup essentials and three protective panels. Ground sheet, light bar, extra pole kits and additional panels are optional accessories.
Can I drive with AT200 attached?
Pack the tent and mounts away before driving. AT200 is a temporary shelter for use while parked.
What about shipping, returns and support?
Orders over US$29 qualify for free shipping to eligible destinations. Delivery is generally 3–15 business days, depending on location. AT200 has a 2-year warranty. Review the linked policies for delivery restrictions and return requirements.