AT200 — Vehicle Awning Tent
A compact camp, right beside your vehicle. About 54 sq ft of shelter, ready in about five minutes.
Front and side extension panels included. Ground sheet, light bar and extra pole kits sold separately.
Compatible accessories
Sold separately · use the cart button to add an accessory.
Free shipping over $29
2-year warranty
Lifetime support
AT200 — Vehicle Awning Tent
More room for the way you camp.
Park your SUV or pickup, attach AT200 to the cabin roof, and make the space beside it your own.
~5 min
Typical setup
~54 sq ft
Room outdoors
UPF 50+
Canopy protection
2 years
Warranty
Open for the breeze. Covered for a break.
Use the mesh enclosure for airflow, or close the included panels for more privacy.
A screen room beside your SUV.
Four-sided mesh, with easy access to your vehicle.
Privacy when you need it.
Front and side extension panels are part of your AT200 kit.
Space to settle in.
A 6.6 × 8.2 ft footprint, with a raised canopy for comfortable standing space.
Pack it. Take it.
Back into its carry bag when the trip is done.
Four steps. Then relax.
About five minutes with practice. Follow the supplied setup instructions.
01 · Form the canopy
02 · Attach the suction mounts
03 · Raise the support poles
04 · Tension and anchor
Simple to mount. Made to support.
210D Oxford canopy · titanium blackout coating · 3000 mm+ waterproof fabric rating.
Foldable aluminum frame
Air-pump suction mounts
Dimensions & specifications
| Footprint | 6.6 × 8.2 ft / approx. 54 sq ft (2 × 2.5 m) |
|---|---|
| Typical standing height | Approx. 7 ft 3 in–7 ft 10 in; varies with vehicle and mounting position |
| Canopy | 210D Oxford fabric with titanium blackout coating |
| Sun / rain protection | UPF 50+ / 3000 mm+ waterproof fabric rating |
| Frame / reinforcement | Foldable aluminum / Dyneema-reinforced top corners |
| Suction mounts | 4.5 in diameter; listed vertical holding force 180 lbf (800 N) |
| Warranty | 2 years |
Check mounts and anchors during use. The suction holding force is not a wind rating. Pack down in severe weather.
What's in the package
- AT200 awning tent
- Air-pump suction mounting system
- Foldable frame and support poles
- Carry bag
- Front extension panel
- Side extension panels
- Guy lines and ground stakes
- Carabiners
Front and side extension panels included. Ground sheet, light bar and extra pole kits sold separately.
Raise an extension panel with an extra pair of canopy poles, sold separately.
Fits the way you travel.
Side setups attach to the cabin roof of your SUV or pickup. Check the roof height and mounting surface before use.
SUV · side setup
Minivan · side setup
SUV · rear setup
RV · side setup
For SUV and pickup side setups, place the suction mounts on a suitable smooth cabin roof. Do not attach the tent to a pickup cargo bed. Check vehicle height and follow the supplied instructions. Roof mounting is intended for vehicles about 5 ft 3 in–6 ft 3 in tall. Ask us about fit or extension poles for your vehicle.
Frequently asked questions
Do I need a roof rack?
No. AT200 uses air-pump suction mounts. Check that your vehicle has a suitable mounting surface and enough height using the fit guide above.
Can one person set it up?
AT200 is designed for solo setup in about five minutes. Allow more time on your first try and follow the supplied instructions.
Can I enclose the space?
The mesh enclosure provides a screened space. Use the included front and side panels to add privacy and coverage.
Can I drive with AT200 attached?
Pack the tent and mounts away before driving. AT200 is a temporary shelter for use while parked.
What about shipping, returns and support?
Orders over US$29 qualify for free shipping to eligible destinations. Delivery is generally 3–15 business days, depending on location. AT200 has a 2-year warranty. Review the linked policies for delivery restrictions and return requirements.