The AT200 vehicle awning tent includes the main shelter and front and side extension panels. A ground sheet, USB light bar and extra pole kits are separate accessories. Start with the setup you want, then choose the additional parts it needs.
What comes with AT200?
The current AT200 product page lists these package contents:
- AT200 awning tent
- Air-pump suction mounting system
- Foldable frame and support poles
- Carry bag
- Front extension panel and side extension panels
- Guy lines, ground stakes and carabiners
Front and side panels are included in the current AT200 package. Separate panel listings are additional or replacement purchases; do not assume every panel must be added to the cart for the basic kit.
Which accessories solve which problem?
| Your setup | Accessory to consider | What to check |
|---|---|---|
| A floor beneath the living area | AT200 Ground Sheet | Sold separately; it does not turn the shelter into a sealed waterproof floor. |
| An extension panel raised as extra shade | An extra pair of foldable canopy poles | AT200 already includes one pair of support poles; additional raised panels can require another pair. |
| Lighting inside the shelter | AT200 USB Light Bar | Needs a compatible USB power source. |
| A smaller roof or limited mounting space | AT200 Extension Pole Kit | Confirm vehicle height and roof surface with CAMPERIG before purchase. |
Ground sheet and light bar
The AT200 Ground Sheet gives you a floor layer beneath the shelter and reduces contact with dirt and damp ground. It is one ground sheet, sold separately. Choose a suitable pitch and avoid treating it as a guarantee against standing water.
The USB Light Bar can mount on either side of AT200 and provides adjustable brightness and color temperature. Its listing includes one light bar, a USB cable and a carry bag. Check the USB power source you plan to use; the listing does not include a power bank.
Extra canopy poles and extension panels
The extra foldable canopy pole kit contains two poles and a carry bag. Choose it when raising an extension panel as an additional canopy. The included AT200 support poles are for the main setup; adding a raised panel is a separate configuration.
Separate front/rear panels and side panels each list one panel. Match the replacement or extra part to the position you intend to use.
Vehicle fit comes before accessory selection
The Extension Pole Kit is intended for smaller roofs or limited mounting space. Its listing includes two suction-cup clamps and one extension pole. It does not establish that AT200 fits every vehicle.
For SUV and pickup side setups, AT200 attaches to a suitable smooth cabin roof, not a pickup cargo bed. The product fit guidance lists vehicle roof mounting around 5 ft 3 in–6 ft 3 in in height. Check your own vehicle's surface and mounting position. Contact CAMPERIG with vehicle details when fit is uncertain.
Before your trip
AT200 is a temporary shelter for use while parked. Pack the shelter and mounts away before driving, check mounts and anchors during use, and pack down in severe weather. Suction holding force is not a wind rating. Follow the supplied instructions for your configuration.
Package information checked on October 4, 2026 against the current AT200 and accessory listings. Current prices and availability are on the product pages; delivery and return terms are in the linked store policies. Browse vehicle awning tents and accessories.
Share:
AF3 Packages: Flashlight, Mounting Kit or T3 Stand?