Más espacio para tu forma de acampar.

Aparca tu SUV o pickup, fija AT200 al techo de la cabina y disfruta del espacio a su lado.

~5 min

Montaje habitual

5 m²

Espacio exterior

UPF 50+

Protección del techo

2 años

Garantía

AT200 features and compact storage

Espacio para instalarte.

Una superficie de 2 × 2,5 m y una cúpula elevada para estar de pie cómodamente.

Cuatro pasos. Y a descansar.

Unos cinco minutos con práctica. Sigue las instrucciones de montaje incluidas.

01 · Forma la cúpula

Lay the tent flat and slide the two foldable poles into the canopy sleeves.

02 · Fija las ventosas

Secure the suction mounts to a suitable smooth roof or side surface using the built-in pump.

03 · Levanta los postes

Assemble the support poles, insert them into the front rings and tighten the locking knobs.

04 · Tensa y ancla

Stake down the tent and adjust the guy lines.

Abierta a la brisa. Cubierta para descansar.

La malla deja circular el aire; los paneles incluidos aportan más privacidad.

Un espacio de malla junto a tu SUV.

Malla en los cuatro lados y acceso al vehículo.

Privacidad cuando la necesitas.

Los paneles frontales y laterales forman parte del kit AT200.

Modular design. Use panels as needed.

Enjoy AT200 as an open, airy awning. Lower the integrated mesh or attach the included protective panels for bug coverage, privacy and extra weather protection.

Bug-free basecamp

Enjoy fresh airflow with four-sided mesh protection.

Side wall panel

Zip on side walls to help block harsh side sunlight and wind.

Extended shade

Raise an attached panel with additional support poles, sold separately, to extend your shaded space.

Weather protection

Zip on the included panels for added protection from wind and rain.

Privacy space

Use the two side panels and one front/rear panel included in the Standard Package to create a more private outdoor space.

Maximum shelter

Add extra support poles and panels, sold separately, to expand your covered campsite.

Lightweight yet durable.

From heat-reflective fabric to reinforced stress points, every detail is built for outdoor comfort.

  • UPF 50+: Titanium reflective coating helps block harsh sunlight and reduce heat buildup.
  • 3000 mm waterproof fabric: 210D Oxford fabric helps repel rain.
  • Reinforced construction: Dyneema-reinforced corners, aluminum poles and secure anchors improve stability.

Fijación sencilla. Soporte firme.

Techo Oxford 210D · recubrimiento opaco de titanio · impermeabilidad del tejido de 3000 mm+.

Estructura plegable de aluminio

Each 4.5-inch mount has a listed vertical holding force of up to 800 N. Use with support poles, stakes and guy lines.

Ventosas de bombeo

Strong, foldable poles support the canopy and pack neatly away between trips.

Para tu forma de viajar.

Los montajes laterales se fijan al techo de la cabina del SUV o pickup. Comprueba la altura y la superficie antes de usarla.

SUV · montaje lateral

Minivan · montaje lateral

SUV · montaje trasero

Autocaravana · montaje lateral

Para montajes laterales en SUV y pickup, coloca las ventosas sobre una superficie lisa adecuada del techo de la cabina, nunca en la caja de carga de la pickup. Comprueba la altura y sigue las instrucciones incluidas. El montaje en techo está previsto para vehículos de unos 1,6–1,9 m. Consúltanos sobre compatibilidad o postes de extensión.

Consulta la compatibilidad con nosotros

Fits on the rear of your vehicle.

Choose a suitable smooth mounting surface for your rear setup. Additional poles for extended shade are sold separately.

AT200 rear-mounted tent and extended shade beside a gray Defender in a sunny meadow

Compact & portable storage.

Folds down small to fit easily in your vehicle. When you are not camping, AT200 stores neatly in your trunk.

18 lb Standard Package. One carry bag.

Dimensiones y especificaciones

ModelAT200 portable vehicle awning tent
Capacity2–4 people
Typical setupAround 5 minutes
Unfolded size6.6 × 8.2 × 7.2 ft
Covered spaceApproximately 54 sq ft
Canopy pole settings5.3 ft or 5.9 ft
Packed size19.7 × 7.1 × 5.5 in
Package size21.7 × 7.9 × 5.9 in
Standard Package weight18 lb
Fabric / coating210D Oxford fabric / titanium blackout coating
Frame / reinforcementFoldable aluminum alloy poles / Dyneema (UHMWPE) reinforcement
Sun / rain protectionUPF 50+ / PU3000+ mm waterproof fabric rating
Suction mounts4.5 in diameter; up to 800 N listed vertical holding force
Standard vehicle heightAbove 5.2 ft; suitable clean, smooth mounting surface required
Warranty2-year warranty

Check mounts and anchors during use. The suction holding force is not a wind rating. Pack down in severe weather.

Everything you need to get started.

The Standard Package includes the awning, integrated mesh, mounting hardware, poles, guy lines, stakes, carrying bags and three protective panels.

Preguntas frecuentes

¿Necesito una baca?

No. AT200 utiliza ventosas de bombeo. Comprueba que la superficie y la altura del vehículo sean adecuadas según la guía anterior.

¿Puede montarla una sola persona?

AT200 está diseñada para que una persona la monte en unos cinco minutos. La primera vez, reserva más tiempo y sigue las instrucciones incluidas.

¿Puedo cerrar el espacio?

La malla crea un espacio protegido. Los paneles frontales y laterales incluidos aportan privacidad y cobertura.

Can AT200 be used without a vehicle?

No. AT200 must remain attached to a vehicle with its suction mounts, support poles, stakes and guy lines installed. It is not a freestanding tent.

Will it fit my vehicle?

Standard mounting is designed for vehicles with a roof height above 5.2 ft.

  • 5.2–6.2 ft roof height: Roof mounting is recommended.
  • Above 6.2 ft roof height: Side mounting is recommended.

For low-roof cars or limited mounting space, contact CAMPERIG with your vehicle model, roof height and mounting-surface photos to confirm fit or discuss optional mounting components.

What is sold separately?

The Standard Package includes the setup essentials and three protective panels. Ground sheet, light bar, extra pole kits and additional panels are optional accessories.

¿Puedo conducir con AT200 fijada?

Guarda la tienda y las ventosas antes de conducir. AT200 es un refugio temporal para usar con el vehículo aparcado.

¿Cómo funcionan el envío, las devoluciones y el soporte?

Los pedidos superiores a 29 USD tienen envío gratis a destinos elegibles. La entrega suele tardar entre 3 y 15 días laborables según la ubicación. AT200 tiene 2 años de garantía. Consulta las políticas enlazadas para ver las restricciones de entrega y los requisitos de devolución.