AT200 Setup & Use Guide

This guide brings together the setup overview and fit notes from the AT200 product page. Use it alongside the instructions supplied with your tent. The overview does not replace the model-specific assembly instructions.

Before setting up

Choose a suitable pitch with the vehicle parked. For SUV and pickup side setups, the suction mounts attach to a suitable smooth cabin roof, not a pickup cargo bed. The listed roof mounting height is about 5 ft 3 in–6 ft 3 in (1.60–1.90 m). Check your roof surface, height and mounting position; examples of vehicles are not a guarantee of fit for every model.

If the roof is smaller or mounting space is limited, ask CAMPERIG about fit before choosing an extension kit. Send the vehicle model, roof height and photos of the planned mounting position.

Check the package

The current AT200 package includes the tent, air-pump suction mounting system, foldable frame and support poles, carry bag, front and side extension panels, guy lines, stakes and carabiners. Ground sheet, USB light bar and extra pole kits are separate. See the package and accessories guide before buying extra parts.

The four-step setup overview

The product setup sequence is shown below. Allow extra time on your first attempt and follow the supplied instructions for attachment, assembly and anchoring.

1. Form the canopy

Form the AT200 canopy
1. Form the AT200 canopy

2. Attach the suction mounts

Use a suitable smooth roof mounting surface. Check the attachments as described in the supplied instructions.

Attach the AT200 suction mounts
2. Attach the AT200 suction mounts

3. Raise the support poles

Raise the AT200 support poles
3. Raise the AT200 support poles

4. Tension and anchor

Use the supplied guy lines and ground stakes as appropriate for the pitch. Check mounts and anchors during use.

Tension and anchor the AT200 shelter
4. Tension and anchor the AT200 shelter

During use and before driving

AT200 is a temporary shelter for use while parked. Pack the tent and mounts away before driving. Pack down in severe weather. The suction mount's listed holding force is not a wind rating, and the canopy's fabric waterproof rating does not guarantee protection in every weather condition.

Use extra canopy poles when raising an extension panel as an additional shade canopy. Match replacement panels and accessories to the intended configuration.

Missing instructions or a setup problem?

Email contact@camperig.com with your product model, order details and photos of the setup. Request the correct manual if it is missing. For cleaning, storage and replacement-part instructions, use the supplied manual or ask the team for model-specific guidance.

Product information checked on October 4, 2026. Visit the product guides and manuals center for other support resources.